Your cart is currently empty!
Capital Safety Recalls, Safety Alerts & Notices
10/12/16 // CAPITAL SAFETY // Recall Notice: DBI-SALA® Zorbit™ Energy Absorber (Note: Recall limited to lot #2101506 through #2464624 only)
“The ZorbitTM Energy Absorber is used with horizontal lifeline systems to limit fall arrest forces on the worker in the event of a fall. 3M Fall Protection (formerly Capital Safety) has identified a production issue with its Zorbit Energy Absorbers that creates a risk of serious injury or death for a user in the event of a fall from height. Although there have been no reported accidents or injuries associated with this issue, 3M Fall Protection is voluntarily recalling a limited lot range of this product and will replace affected energy absorbers free of charge.”
– Capital Safety
08/30/16 // CAPITAL SAFETY // IMMEDIATE ACTION REQUIRED Product Stop Use & Recall / Replacement Notice: Lad-Saf™ Sleeve
“Capital Safety/3M recently reviewed the performance of the original Lad-Saf sleeve in the field, including a limited number of incidents involving a serious injury or death in the United States while using the sleeve. Although our review did not reveal product hazard or risk scenarios that would arise in the ordinary and proper use of the product, it did reveal potential misuse scenarios that could result in serious injury or death. The potential misuse scenarios include interference with the braking mechanism (such as entanglement with cords, lanyards, clothing or other materials, or grasping the sleeve prior to or during a fall), or result from the user attaching the sleeve upside down (user inversion). No safety regulator has made a finding that the design of the original Lad-Saf sleeve is defective.”
– Capital Safety
04/18/16 // CAPITAL SAFETY // Product Retrofit Notice: Advance Adjustable Offset Davit System (USA Version)
“Capital Safety/3M recently reviewed the performance of the original Lad-Saf sleeve in the field, including a limited number of incidents involving a serious injury or death in the United States while using the sleeve. Although our review did not reveal product hazard or risk scenarios that would arise in the ordinary and proper use of the product, it did reveal potential misuse scenarios that could result in serious injury or death. The potential misuse scenarios include interference with the braking mechanism (such as entanglement with cords, lanyards, clothing or other materials, or grasping the sleeve prior to or during a fall), or result from the user attaching the sleeve upside down (user inversion). No safety regulator has made a finding that the design of the original Lad-Saf sleeve is defective.”
– Capital Safety
02/22/16 // CAPITAL SAFETY // Product Retrofit Notice: UniRail / RoofSafe Carriage
“Capital Safety is issuing a Product Retrofit Notice regarding the UniRail / RoofSafe carriages manufactured before February 2015. Capital Safety has received a limited number of reports of fractured circlips (the locking screw retaining clips) which can allow the locking screw to unscrew and separate from the carriage body. If the locking screw separates from the carriage body, it is possible for the shackle retaining pin to slide out of the carriage body and release the tie-off shackle.”
– Capital Safety
03/12/15 // CAPITAL SAFETY // Inspection Notice: Select Carabiner Internal Coil Springs
“Capital Safety has learned of broken screw heads found in a limited number of Protecta brand Rebel Self Retracting Lifelines (SRLs). The units affected by this notice are the black, extruded aluminum housing versions of the Rebel, manufactured between 1 April 2014 and 30 November 2014.”
– Capital Safety
12/19/14 // CAPITAL SAFETY // Product Safety Notice: Lad-Saf Ladder Safety System
“Capital Safety has issued a Product Safety Notice to the Tower Industry regarding the Lad-Saf Ladder Safety System.
The affected systems are:
- systems using 3/8 inch 7×19 wire rope galvanized cable
- purchased from Capital Safety between September 1, 2013, and May 13, 2014
Lad-SafProductSafetyNotice19Sept2014”
– Capital Safety
02/11/13 // CAPITAL SAFETY // Safety Recall Notice: DBI-SALA Sayfglida Horizontal Lifeline System (“Sayfglida System”)
“Capital Safety is undertaking a voluntary recall of the sleeve (or shuttle) component of the DBI-SALA Sayfglida Horizontal Lifeline System (“Sayfglida System”). The Sayfglida System is permanently installed as a means of anchoring a fall protection system and consists of a Sayflink Sleeve, a wire cable, and by-passable intermediate brackets. The brackets are designed so that the system may be installed above the user, level with the user, or at walking surface level.”
– Capital Safety
02/24/12 // PEN SAFE/CAPITAL SAFETY // Recall Notice 2nd Release: 3730 Anchorage Connector with a manufacturing code 07B
“Capital Safety parts affected by the PenSafe recall, reissued February 7, 2012, include the following: AN112A anchorage connector and Vacuum Anchor models; 2200104, 2200106, 2200047, 2200046, 2200045, 2200037, 2200036.”
– Pen Safe / Capital Safety
01/20/12 // CAPITAL SAFETY // Revised Recall Notice: Protecta Shock Absorbing Twin-Leg Lanyards
“The identified reason for the inadvertent disconnection is the combination of a particular style locking snaphook together with twin elastic lanyard legs attached directly to the eye of the snaphook.”
– Capital Safety
11/11/11 // CAPITAL SAFETY // Recall Notice: Y-Shaped Protecta Shock Absorbing Lanyards
“A inadvertent disconnection was reported during use of the locking snaphook used in a series of Capital Safety’s “Y-shaped” Protecta lanyards (part number 9502573).”
– Capital Safety
