Petzl GRILLON Adjustable Work Positioning Lanyard with MGO Connector

SKU: PT-L052DA0 Categories: ,

$299.95$304.95

Precisely adjust for comfortable positioning along your fall arrest system.

The GRILLON MGO lanyard is used to make work positioning systems, to complement a fall-arrest system. Its length can be very effortlessly and specifically adapted as necessary for comfortable positioning at the workstation. Connector with a very large gate aperture is standard for connection to metal formations or to large-diameter cables and bars. GRILLON MGO is available in two lengths: 2 and 3 m, and is certified to North American and European standards.

QTY

Petzl GRILLON Adjustable Work Positioning Lanyard with MGO Connector is:

    • Easy to use: the fine adjustment system allows the length to be precisely adjusted for comfortable positioning at a workstation
    • Used in single mode on the harness ventral attachment point when the anchor is located above the user, so that the load is comfortably distributed between the belt and leg loops. Length is adjusted by operating the handle while holding the free end of the lanyard
    • Ends equipped with a plastic sheath that holds the connector in place and protect the rope from abrasion
    • Comes with an MGO connector with a very large gate opening for connection to metal structures
    • Available in two lengths: 2m and 3m. Lanyard length is immediately identified by a color-coded label at the connector end

Sku

    • 2m PT-L052DA00
    • 3m PT-L052DA01

Additional information

Meets Exceeds

ANSI Z359.3, CSA Z259.11, CE EN 358, CE EN 12841 type C, EAC

Type

Adjustable

Lanyard Type

Single Leg

ANSI Compliant

Yes

Manufacturer NAV

Petzl

Close
Your Cart